Echo Ring Foot Adaper Kit is a set of six (6) acrylic ring that attach o any hopping foot or ruler foot with 1/2” outside diameter. By sing these acrylic rings size: 3/8”, 1/2”, 5/8”, 3/4”, 7/8” and 1”, you can obtain an interval 3/8”, 1/2”, 5/8”, 3/4”, 7/8” and 1”. These acrylic rings willperfectlyfit our

ruler feet #RUFT-LS-NS and RUFT-HS-NS and RUFT-HS-NS and also #RUFT-BEARING etc.

#ERC-SET6 ECHO Ring Clip set 6 sizes-3/8”,1/2”,5/8”,3/4”,7/8”, and 1”

#ERC-3/8    ECHO Ring Clip 3/8”

#ERC-1/2   ECHO Ring Clip 1/2”

#ERC-5/8   ECHO Ring Clip 5/8”

#ERC-3/4   ECHO Ring Clip 3/4”

#ERC-7/8   ECHO Ring Clip 7/8”

#ERC-1       ECHO Ring Clip 1”

These Echo Ring Clips are laser-cut from 5mm acrylic and laser-engraved on the back side to reduce parallax errors.

Picture shown is with "red" marking line and inch. However the product is engraved/etched by laser

without colour. We recommend you to use water-based marking pen preferably in "red" or "pink"

colour to colour the etched markings lines for better visibility.

Since the opening is cut slightly smaller than 1/2" to ensure the ring will not fall off, so if you find it

difficult to push the ruler foot  the hole just use awl to open up a little bit wider as shown in the

picture.

Use it on all ruler feet that has a 1/2" (12.7mm) outside diameter to do the echo size you need. The

sizes denote the distance from the needle to the edge. Usually all ruler feet for both domestic

sewing machines and all longarm or mid-arm quilting machines like Handi Quilter, Bernina, Innova,

Nolting, Martelli, Juki, Janome, Q'nique, Babylock etc. etc. have 1/2" (12.7mm) outside diameter so

just clip the echo ring onto the ruler foot.

When using the edge of the ruler foot, there is a 1/4” distance from the needle to the edge of the

foot. The Echo Ring Clip provide a 3/8” interval, 1/2” interval, 5/8" inverval, 3/4” interval, 7/8"

internval and a 1" interval.

These echo feet are very helpful when quilting piano keys on a border and when creating channel

quilting. Easily echo different distances around a singel circle ruler template. Or create grids and

cross-hatching with different widths.